Product Description And Specifications; Product Features; Intended Use; Tool Specifications - Würth STP 12-A Originalbetriebsanleitung

OBJ_BUCH-2273-002.book Page 17 Friday, May 20, 2016 11:38 AM
 Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e.g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short circuit
can occur and the battery can burn, smoke, explode or
overheat.

Product Description and Specifications

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
For damage caused by usage other than intended, the user is
responsible.

Product Features

The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Battery pack
2 Battery unlocking button
3 Button for light
4 Thumbwheel for stroke rate preselection
5 Battery charge-control indicator
6 Temperature control/overload protection indicator
7 On/Off switch
8 Adjusting lever for orbital action
9 Base plate
10 Guide roller
11 Stroke rod
12 Plastic sliding shoe
13 Saw blade*
14 Splinter guard
15 Extraction hood
16 Light
17 Handle (insulated gripping surface)
18 Vacuum connection
19 Nose plastic sliding shoe
20 Clamping lever for saw blade release
21 Contact protector
22 Vacuum hose*
23 Screw
24 Hex key
25 Scale for mitre angle
*Some accessories shown or described are not part of
the standard delivery scope of the product.

Tool Specifications

Cordless Jigsaw
Art. No.
Rated voltage
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
1) depending on the battery pack being used
2) Limited performance at temperatures <0 °C
STP 12-A
5700 114 X
V= 12.0
-1
min 1500–2800
mm 18
mm 70
mm 3
mm 3
° 45
17