User Information; Field Of Application; Warranty; Manufacturer Contact Data - HallermannTyton AT2000 CPK Betriebsanleitung

1 User information

These operating instructions are an essential aid for
proper operation of the AT2000 CPK bench mount kit.
They contain important information and safety
instructions to properly set up the products as well as for
their intended and economical use.

1 .1 Field of application

The operating instructions are directed towards
technicians and the operator.
These operating instructions only apply for the following
AT2000 CPK bench mount kit, referred to in the following
as "bench mount" and the associated Autotool 2000 CPK
tool, referred to as "tool" in the following.
TYPE
AT2000 CPK bench mount kit
Autotool 2000 CPK

1 .2 Warranty

The warranty complies with the statutory requirements.
Warranty claims are only valid in the country where the
products were purchased.

1 .3 Manufacturer contact data

The manufacturer of the product described in these
instructions is:
HellermannTyton GmbH
Großer Moorweg 45
D-25436 Tornesch
Tel. +49 4122 701-0
www.HellermannTyton.de
Info@HellermannTyton.de
1 .4 Information on the operating instructions
Last change: 13.3.2020

1 .5 Copyright and intellectual property rights

The manufacturer retains the copyright for this manual.
No part of this manual may be reproduced in any form
without the written consent of HellermannTyton GmbH
(called HellermannTyton in the following), nor may it be
processed, duplicated or distributed using
electronic systems.
Actions that violate the aforementioned statements will
require payment of damages.
Operating Instructions • Bench Mount Kit AT2000 CPK • 03/2020 • 106-29020

1 .5 .1 Used labels and symbols

In these operating instructions, different labels and
symbols are used in the text. These are explained in
the following:
f Symbol for an instruction
•
1 First step
2 Following steps
; Outcome
Text that is à highlighted in this manner indicates cross-
references.
Article No .
106-00040
106-00000

1 .6 Keeping and handing over these instructions

These operating instructions must be kept in the
immediate vicinity of the workplace and must be available
to all personnel at all times. The operator must inform the
personnel about where this manual is kept. If the manual
should no longer be legible, the operator must procure a
replacement from the manufacturer.
When the products are handed over or sold to third
parties, the following documents must be handed over to
the new owner:
•
•
•

1 .7 Target group of these instructions

The instructions must be read and observed by all persons
who have been assigned with the following work:
•
•
•
•
•

1 .8 Applicable documents

f The operating instructions for the Autotool 2000 CPK

1 .9 General information

We reserve the right to make technical changes
without notice.
Symbol for an enumeration
Messages with this symbol contain information about the
environment and how you can help protect it.
Texts with this symbol contain additional information.
this manual
documents regarding repair work
verification of maintenance work
Installation
Operation
Maintenance
Repair
Troubleshooting
must be observed.
User information
4