Operation - Geberit MAPRESS Bedienungsanleitung

Operation

Inserting the Geberit adapter jaw into the pressing tool
WARNING
Risk of injury caused by flying fragments if used incorrectly
or if worn or damaged adapter jaws are used
▶
Only use the adapter jaw if it is in perfect working order.
▶
Make sure that the adapter jaw used fits the pressing collar.
▶
If the adapter jaw has been used incorrectly, or in a way
that does not comply with its intended use, do not continue
to use it and have it tested by an authorised repair shop.
▶
Wear suitable protective equipment (protective goggles,
protective helmet, etc.).
CAUTION
Risk of injury due to unsecured Geberit pressing
attachments falling
▶
When inserting the Geberit pressing attachments (pressing
jaws, adapter jaws) into the tool holder, the pressing tool
must be upright.
ATTENTION
Damage to the tool caused by incorrect use
▶
Only use Geberit pressing attachments (pressing jaws, pressing
collars, adapter jaws) that carry the same compatibility mark as the
pressing tool.
▶
Insert the Geberit adapter jaw into the pressing tool as described.
→ See operating instructions for the relevant pressing tool.
9007202280124939-1 © 10-2018
968.070.00.0 (01)
EN
35