Instructions For Periodic Maintenance; Troubleshooting - Makita DUC204 Betriebsanleitung

2. After cleaning the tool, run it under no load to
lubricate the saw chain and guide bar.
3. Cover the guide bar with the guide bar cover.

Instructions for periodic maintenance

To ensure long
functioning of the
performed regularly. Warranty claims can be recognized only if this work is performed regularly and properly.
Failure to perform
accidents! The user
maintenance work which is not described in the instruction manual. All such work must be carried out by our
authorized service center.
Check item / Operating time
Chain saw Inspection.
Cleaning.
Check at
authorized
service
center.
Saw chain Inspection.
Sharpening if
necessary.
Guide bar Inspection.
Remove from
the chain saw.
Chain brake Check the
function.
Have it
inspected
regularly at
authorized
service
center.
Chain Check the oil
lubrication feed rate.
Switch trigger Inspection.
Lock-off lever Inspection.
Oil tank cap Check
tightness.
Chain catcher Inspection.
Screws and Inspection.
nuts

TROUBLESHOOTING

Before asking for
you find a
manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using
Makita replacement parts for repairs.
life, prevent
safety features,
the prescribed maintenance
of the
Before Everyday
operation
-
-
- -
-
- -
- -
-
- -
-
-
-
-
- -
- -
repairs, conduct
problem that
25 ENGLISH
4. Empty the oil tank.
damage and ensure
the following maintenance
work
chain saw must
Every week Every 3
month
- -
- -
- -
- -
- -
- -
- -
- -
-
- -
- -
- -
- -
-
-
your own inspection first.
is not explained in
the full
must be
can lead to
not perform
Annually Before
storage
- -
- -
- -
-
- -
-
- -
- -
- -
- -
- -
- -
- -
- -
If
the