Program Settings - Nibe ACS 310 Installateurhandbuch

Program settings

Program setting of ACS 310 can be performed via the
start guide or directly in the menu system.
START GUIDE
The start guide appears upon first start-up after heat
pump installation, but is also found in menu 5.7 .
MENU SYSTEM
If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
MENU 1.9.5 - COOLING SETTINGS
Here, you make your settings for cooling.
MENU 4.2 - OPERATING MODE
Choose between different operating modes.
MENU 4.9.2 - AUTO MODE SETTINGS
Here, you set the temperatures, which control when
heating and cooling are permitted to be active in AUTO
operating mode.
MENU 5.2 -SYSTEM SETTINGS
Activating/deactivating of accessories.
Caution
Also see the Installer manual for the indoor
module.
ACS 310 F-serien | GB
F
79