Using The Cooling Device - Mobicool MCF32 AC/DC Bedienungsanleitung

Operation
6.5

Using the cooling device

A
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat
that generated during operation can dissipate. Ensure that the ven-
tilation slots are not covered. Make sure that the cooling device is
sufficiently far away from walls and other objects so that the air can
circulate.
➤ Place the cooling device on a firm foundation.
I
NOTE
Place the cooling device as shown (fig. 1, page 3). If you operate
the cooling device in a different position it can be damaged.
➤ Connect the cooling device, see chapter "Connecting the cooling device"
on page 12.
A
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooling device
that are intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button for between one and two seconds.
✓ The "POWER" LED lights up.
✓ The display switches on and shows the current cooling temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooling device starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED "POWER" flashes
orange.
14
MCF32, MCF40, MCF60 AC/DC
EN