Specifications - Sharp Sf-2218 Bedienungsanleitung

SF 2218 NON EU GB+D.p65
Downloaded from: http://www.usersmanualguide.com/

SPECIFICATIONS

Type Desktop
Copy system Dry, electrostatic transfer
Originals Sheets, bound documents
Original sizes Max. A3
Copy sizes Max. A3, Min. A6, Image void: Max. 4 mm (leading and trailing edges)
Coying speed 18 copies/min.
Continuous copy Max. 99 copies; subtractive counter
First-copy time 5.3 sec. (except in power save modes)
Copy ratio Variable: 50% to 200%, in 1% increments (total 151 steps)
Fixed preset: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
Exposure system Moving optical source, slit exposure (stationary platen) with automatic
exposure function
Warm-up time Approx. 35 sec.
Copy paper feed One paper tray with automatic feed (250 sheets) one manual bypass
Fusing system Heat rollers
Developer system Magnetic brush development
Light source Halogen lamp
Power supply Local voltage ±10% (For this copier's power supply requirements, see the
name plate located on the right hand side of the copier, below the bypass tray.)
Power consumption Max. 1.5 kW
Overall dimensions 935 mm (W) x 595 mm (D) (with exit tray)
Weight Approx. 42,5 kg (with document cover)
Copier dimensions 600 (W) x 595 (D) x 365 (H) (mm)
Operating conditions Temperature: 15 °C to 30 °C, Humidity: 20% to 85%
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be some deviation from these values
in individual units.
29
3 – 29
27/08/99, 08:38