Santec VTC-279IRPWD Bedienungsanleitung Seite 34

L/L Sync (LineLock Synchronsation):
INT: internal synchronisation
LL: LineLock synchronisation
Note: If you use 12 V DC, synchronisation iss et to „internal". If you use 24 V
AC at 60 Hz, you can also use LineLock synchronsation.
Monitor type:
Change the settings according to your monitor. LCD/CRT monitors can be
used.
Factory Reset:
Return to factory settings.
Communication:
Protocols: Pelco-D is supported by default.
Camera ID: Camera ID can be set to 0-255.
Baud rate:
Save/reboot: Save the set values and reboot the camera.
Previous:
Exit:
Save the current settings and return to main menu.
_________________________________________________________________________________
Bedienungsanleitung / User Manual VTC-279IRPWD / VTC-280IRPWDU

Baud rate can be set to 4800-57600.
Return to main menu.
- 34 -
VTC-282IRPWD / VTC-289IRPWD