Santec VTC-279IRPWD Bedienungsanleitung Seite 29

Bedienungsanleitung / User Manual VTC-279IRPWD / VTC-280IRPWDU
3. Exposure
The following exposure adjustments can be made:
AGC (Automatic Gain Control):
Automatic gain control to adjust the brightness. The brightness can be re-
adjusted.
off, low, middle or high
Shutter:
A.FLK:
ESC:
Manual:
Sens-up:
The camera automatically detect the light level and creates a clear picture.
You can adjust the shutter speed (x2 – x512). The higher the value, the more
likely you will achieve a clear picture but noise may occur.
Initial Set:
Return to default settings.
Previous:
Return to main menu.
4. Day/Night
Colour:
B/W:
ISC:
Auto:
Colour display for normal light conditions and black/white display for dim or
low light/darkness.
Note: Day/night function is not active if AGC is switched off in the exposure menu.
_________________________________________________________________________________
VTC-282IRPWD / VTC-289IRPWD
The flickerless mode (FLK) reduces picture flickering.
The shutter speed is controlled automatically.
The shutter speed is controlled manually::
1/160 - 1/90000, x2 – x512
Colour picture
Black/white picture
Intelligent IR saturation control. The IR saturation is being
reduced.
The picture display adapts tot he environmental illumination:
- 29 -