Santec VTC-279IRPWD Bedienungsanleitung Seite 31

Bedienungsanleitung / User Manual VTC-279IRPWD / VTC-280IRPWDU
6. White Balance
ATW: Auto Tracking White Balance for colour temperatures of 1700°K to
11000°K.
Col-Roll: Choose the function if colour rolling occurs.
AWC-Set: Automatic white balance if you hold a white sheet of paper infront of
the camera and press the joystick (sufficient light conditions required).
Manual: After ATW and AWC settings are made, you can use „manual" to fine-
tune the settings. You can also set the colour temperatures for indoor and
outdoor modes.
Note:
White balance might not work properly under the following conditions:
a. If the colour temperature surrounding the object is our of the control range, e.g.
clear sky or sunset
b. If the ambient illumination around the object is dim
c. If the camera is directed towards a fluorescent light or is installed in a place with
dramatically changing light conditions
7. 3D-DNR (Digital Noise Reduction)
Background noise in low light conditions can be reduced using a 2D and 3D filtering
system.
Select „3D-DNR". Activate or deactivate this function.
Destination: Set the brightness for low light conditions. This setting will
override all other previous brightness settings. If the 3D-DNR level and the
destination level is high, an after-image symptom ("ghost effect") may occur.
Global movement: Automatic adjustment oft he 3D-DNR filter to picture
movements.
Note: If AGC is off, the 3D-DNR function is off, too.
_________________________________________________________________________________
VTC-282IRPWD / VTC-289IRPWD


- 31 -