HELIX DSP Bedienungsanleitung Seite 18

Unique Features of the HELIX DSP
Power Save Mode
the HELIX DSP once there's no input signal present
for more than 60 seconds.
or any other internal bus structures it may happen
be turned off.
within a second if a music signal is applied. It is pos-
sible to either modify the turn-off time of 60 sec. or
the PC-tool software.
18
Start-/Stop capability
- The switched power supply of the HELIX DSP as-
crank.
Automatic Digital Signal Detection
Switching from analog input to the digital input is
done automatically as soon as an signal is detected
the optional cable remote control URC 2A for ma-
nual switching between analog and digital inputs.