Usb Input - HELIX DSP Bedienungsanleitung

Initial start-up and functions
ded, orange means that setup 2 (af2/ac2) is loaded.
software or the internal microSD card reader.
8 MicroSD card reader
The Micro SD card reader can be used to down-
the HELIX DSP when the card is inserted. Copying
is shown by the status LED blinking red; when it
Attention:
copying.
The HELIX DSP can handle two different setup
is copied to memory storage one, or "af2" / "ac2"
Please note: Do not store more than one "af1" or
croSD card at a time.
With the control pushbutton you can toggle between
the PC tool software the mode switch function of the
optional remote control URC 2A as "setup switch"
as well.

9 USB Input

Connect your personal computer to the HELIX DSP
ded from the Audiotec Fischer website.
Control Input
10
This multi-functional connector is designed for
HELIX DSP accessory products like the cable re-
mote control URC 2A. With this remote it is possible
14
It consists of two rotary controls and one toggle
Line Output
11
assigned to any of the inputs as desired using the
- PC-tool software.
-
-
-
-