testo 512 Bedienungsanleitung Seite 30

5. Operation
30


info@Testo-Direct.com
2
Setting the unit of pressure:
The configuration modus is open, the set unit blinks.

Set the desired unit with
.
3
Setting the parameter for the lower measurement
value line:
The parameters temperature (internal temperature
sensor) or flow (versions 2hPa, 20hPa and 200hPa only)
can be displayed in the lower measurement value line.
The configuration modus is open, °C°F lights up.

Select the desired option with
1
with :
· On: The temperature measurement value is
displayed in the lower measurement value line,
except when the display of flow measurement
value is activated (versions 2hPa, 20hPa and
200hPa only).
· OFF: The temperature measurement value is not
displayed in the lower measurement value line.
OFF is selected, Version 2000hPa:
Next handling objective

OFF is selected, Versions 2hPa, 20hPa and 200hPa:
- m/s and fpmx100 light up.
Next step

On is selected:
- The set temperature blinks.
Select the desired unit with
2
with :
Version 2000hPa:
Next handling objective

Versions 2hPa, 20hPa and 200hPa:
www.
- m/s and fpmx100 light up.
4 S
.
3
4 S
Testo-Direct
/ and confirm with
/ and confirm
.
D
ET AMPING
/ and confirm
.
D
ET AMPING
1.888.475.5235
.com