Switching The Instrument On / Off; Switching The Display Light On / Off; Performing Settings - testo 512 Bedienungsanleitung

5.2 Switching the instrument
on / off
 Switching the instrument on:
Press
- A segment test is carried out: The measurement
value display segments light up briefly (2x 8888).
- Measurement view is opened: The current reading
is displayed.
 Switching the instrument off:
Press and hold
goes out.
5.3 Switching the display
light on / off
  S witching the display light on/off:

The instrument is switched on.

Press

5.4 Performing settings

1
To open configuration mode:

The instrument is switched on and is in measurement

view. Hold, Max or Min are not activated.
Press and hold
changes.
- The instrument is now in configuration mode.
You can change to the next function with
info@Testo-Direct.com
You can leave configuration mode at any time. To do
so, press and hold
instrument has changed to measurement view. Any
changes that have already been made in configuration
mode will be saved.
.
(for approx. 2s) until the display
.
(for approx. 2s) until the display
www.
Testo-Direct
(for approx. 2s) until the
5. Operation 29
.
1.888.475.5235
.com