Bosch BGS41 Serie Gebrauchsanleitung Seite 53

g) Allow the filter foam to dry completely for at least 24
hours and then place both filters back in the bottom
plate of the dust container.
h) Close and lock the bottom plate.
i) Insert the dust container into the appliance.
Maintaining the exhaust filter
The exhaust filter is designed so that it does not need
to be replaced, provided the appliance is used as in-
tended in the household.
To ensure that the vacuum cleaner is working at its op-
timum power level, the exhaust filter should be washed
after one year. The filtering action of the filter remains
intact, even if the filter surface becomes discoloured.
26*
Figure
a) Open the rear flap by pressing on the release button.
b) Pull the locking tab in the direction of the arrow to
release the (H)EPA filter and remove it from the ap-
pliance.
c) Remove the filter foam from the rear flap.
d) Tap out the filter unit and filter foam and rinse them
under running water.
Alternatively, the
washing machine at max. 30 °C using a gen-
tle programme and
TIP: To protect other laundry items, put the filter unit
into a laundry bag.
e) Once the (H)EPA* filter has dried completely (at
least 24 hours), insert it back into the appliance and
lock it in place.
f) Insert the filter foam and close the rear flap.
After vacuuming fine dust particles (e.g. gypsum, ce-
ment, etc.), clean the motor protection filter by tapping
it out or, if necessary, replace the motor protection fil-
ter and exhaust filter.
Cleaning the Remote-Power-Control handle
Tip: Clean the infrared transmitter onthe Remote-Pow-
er-Control handleregularly. A dirty Remote-Power-Con-
trol handle can lead to faults duringoperation.
‡
Clean the Remote-Power-Controlhandle with a soft
cloth and a com-mercially available plastic cleaner.
Changing the batteries
27
Figure
a) Remove the cover.
Tip: Use an object such as a coin to open the cover.
‡
Remove the empty batteries.
b) Insert the new batteries(AAA LR03).
c) Close the cover.
‡
Dispose of the empty batteries in an environmentally
friendly manner.
unit can be cleaned
the lowest spin
Cleaning instructions
Always switch off the vacuum cleaner and unplug the
mains plug before cleaning the vacuum cleaner. The
vacuum cleaner and plastic accessories can be cleaned
with standard plastic cleaner.
!
Attention:
Do not use abrasive cleaning products, glass clean-
er or multi-purpose cleaning products. Never im-
merse the vacuum cleaner in water.
Subject to technical modifications.
in a
speed.
* Dependent on model
53