Bosch BGS41 Serie Gebrauchsanleitung Seite 50

en
Congratulations on your purchase of a Bosch vacuum
cleaner from the GS41 – Serie 6 series.
This instruction manual describes various GS41 – Se-
rie 6 models, which means that some of the equipment
features and functions described may not apply to your
model. You should only use genuine Bosch accessories
– these have been specially developed for your vacuum
cleaner to achieve the best possible vacuuming results.
Please keep this instruction manual for future refer-
ence. When giving the vacuum cleaner to a third party,
please also pass on this instruction manual.
Please fold out the illustrated pages.
Description of the appliance
1 Adjustable floor nozzle* (For the same functions, the
appearance of the nozzle may differ from the picture)
2 Telescopic tube with adjusting sleeve and accessory
connection*
3 Accessory support*
4 Multi-Use-Brush*
5 Telescopic tube with sliding switch but without acces-
sory connection*
6 Telescopic tube with sliding switch and additional air
point*
7 Remote-Power-Control handle
8 Flexible hose
9 Mains cable
10 Rear flap release button
11 Rear flap
12 Filter control indicator (SmartSensor Control)*
13 Parking aid on the side of the appliance
14 Dust container carrying handle
15 Dust container
16 Dust container release button
17 On/off button
18 Carrying handle
19 Fluff filter
20 Storage aid on the underside of the appliance
21 Animal-hair nozzle*
22 Crevice nozzle*
23 Professional crevice nozzle*
24 Upholstery nozzle*
25 Professional upholstery nozzle*
26 Upholstery nozzle with folding edge-cleaning bristles*
27 Drill dust nozzle*
28 Mattress nozzle*
50
Spare parts and optional accessories
A BBZ123HD hard-floor nozzle
For vacuuming smooth floors
(parquet, tiles, terracotta, etc.)
B BBZ124HD hard-floor nozzle
Includes two rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.
Before using the appliance for the first time
1
Figure
‡
Push the handle onto the suction hose and lock it in
place.
Starting the appliance
2
Figure
‡
Push the suction-hose adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
3
Figure
‡
Push the handle into the telescopic tube until it
locks into place.
4
Figure
‡
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
5*
Figure
‡
Unlock the telescopic tube by moving the sliding
switch or adjusting sleeve in the direction of the ar-
row, and adjust it to the desired length. The slide
resistance on carpet is at its lowest when the tel-
escopic tube has been fully extended.
6*
Figure
‡
Attach the accessories holder to the telescopic
tube.
7
Figure Inserting the batteries
‡
Remove the cover.
Tip: Use an object such as a coin to open the cover.
‡
Insert the batteries into the Remote-Power-Control
handle.
8
Figure Switching on the appliance
a) Hold the mains plug and pull it out to the required
length.
‡
Insert the mains plug into the socket.
b) Press .
= The status display pulses blue. >
= The appliance is in standby mode. >
* Dependent on model