Monacor TVCCD-465HCOL Anleitung Seite 4

Menu Line Selection (Submenu)
Menu page 1
TYPE
AUTO↵ MODE
LENS
SPEED
RETURN↵*
MANUAL Lens with manual iris
HIGH LUMINANCE
MODE
AUTO↵ BRIGHTNESS
LOW LUMINANCE
SHUTTER/AGC
MODE
BRIGHTNESS
Manual exposure adjustments
MODE
MANUAL↵
SHUTTER
AGC
Automatic white balance for the colour temperature range 1800 – 10 500 K
SPEED
DELAY CNT
ATW↵
ATW FRAME
ENVIRONMENT
PUSH Automatic white balance extending over the entire colour temperature range
Manual white balance by adjustment of the amplification for the colours blue and red
WHITE BAL USER1↵ B-GAIN
White Balance R-GAIN
Manual white balance by adjustment of the amplification for the colours blue and red
USER2↵ B-GAIN
R-GAIN
Automatic white balance with suppression of colour rolling which may occur when using certain fluores-
ANTI CR
cent lamps
MANUAL LEVEL
Single semi-automatic white balance: in the environment of application hold a white object (e. g. sheet of
PUSH LOCK
paper) in front of the camera and press the key SET. The camera performs a white balance.
OFF No compensation
BACK LIGHT
BLC Backlight compensation to brighten up objects in front of a bright background (e. g. window)
Backlight
Highlight compensation to blacken bright light sources (e. g. headlights)
compensation
HLC
to be able to reproduce objects (e. g. number plates) in a clearly visible way
(Adaptive Tone-Curve Reproduction) optimizes the reproduction in case of significant differences in contrast
OFF ATR function off
ATR
LUMINANCE
ON↵
CONTRAST
NR MODE
NR
↵
Noise
Y LEVEL
Suppression
C LEVEL
Bold type = factory setting
↵
* The line RETURN is available in all submenus; it is used to return to the main menu.
®
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Adjustment; Function
DC, VIDEO; lens with DC voltage-controlled iris or video signal-controlled iris – The
adjustment is made via the switch (8), the option indicated is of no importance.
AUTO, OPEN, CLOSE
AUTO = brightness control via the iris, OPEN = iris is open (brightness control via
shutter only), CLOSE = iris is closed
0 ... 50 ... 255 = control speed
Return to the main menu
AUTO IRIS, SHUT+AUTO IRIS; defines if the control in the upper brightness range is
only to be made via the iris of the lens or via the iris and the shutter. If the option
MANUAL has been selected under LENS, SHUT is defined in this case.
0 ... 24 ... 255 = standard value for the brightness control
AGC, OFF; defines if a gain control is to be made in the lower brightness range
(AGC) or not (OFF)
×0.25 ... ×0.75 ... ×1.00 = control range
SHUT+AGC
1 ⁄ , 1 ⁄ , 1 ⁄ , 1 ⁄ , 1 ⁄ , 1 ⁄ , 1 ⁄ , 1 ⁄ = shutter time [s]
50 100 250 500 1000 2000 4000 10 000
6.00, 12.00, 18.00, 24.00, 30.00, 36.00, 42.00, 44.80 = gain [dB]
0 ... 239 ... 255 = control speed
0 ... 16 ... 255 = control delay
×0.50, ×1.00, ×1.50, ×2.00 = states the relative size of the colour temperature range
determined by the control
INDOOR, OUTDOOR = range of application: indoor or outdoor operation
0 ... 30 ... 255 = amplification blue
0 ... 33 ... 255 = amplification red
0 ... 46 ... 255 = amplification blue
0 ... 26 ... 255 = amplification red
19 ... 59 (manual white balance)
LOW, MID, HIGH = extent of luminance compression
LOW, MIDLOW, MID, MIDHIGH, HIGH = extent of contrast increase
Y, C, Y/ C, OFF = noise filter for luminance signal (Y), chrominance signal (C), for
both signals (Y/ C) or none (OFF)
0 ... 10 ... 15 = filter value for luminance
0 ... 10 ... 15 = filter value for chrominance
Menu Line Selection (Submenu)
AUTO↵
BURST
Automatic switching
over between colour DELAY CNT
operation and black-
DAY/ NIGHT DAY NIGHT
and-white operation
Day/ Night NIGHT DAY
switching over
COLOR Colour operation
B/ W↵
Black-and-white BURST
operation
NEXT↵ To menu page 2
SAVE ALL Memorize all adjustments with the key SET.
EXIT↵ Exit the on-screen menu
Menu page 2
OFF No camera name is inserted into the picture.
Insert camera name into the picture (2 lines with 26 characters each as a maximum)
A, B, C, ... ×, +, / Select character and insert it with the key SET
CHR1, CHR2
CAMERA ID
ON↵ , , ,
CLR
POS↵
MIRROR
BRIGHTNESS
PICT ADJUST
CONTRAST
↵
Picture
SHARPNESS
Adjustments
HUE
GAIN
OFF Motion detection off
DETECT SENSE 0 ... 111 ... 127 = sensitivity of response
BLOCK DISP
MOTION DET
Motion Detection
ON↵
MONITOR AREA
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
OFF Masking of picture areas deactivated
AREA SEL
TOP
PRIVACY
BOTTOM
Masking
of picture
ON↵ LEFT
areas
RIGHT
COLOR
TRANSP
MOSAIC
ENGLISH, DEUTSCH, Select the menu language
LANGUAGE
(... ESPAÑOL, PORTUGUÊS, РУССКИЙ, 日本語)
FRANCAIS, ...
CAMERA RESET Reset all adjustments to the factory setting with the key SET.
BACK↵ Return to menu page 1
SAVE ALL Save all adjustments with the key SET.
EXIT↵ Exit the on-screen menu
Copyright © by MONACOR INTERNATIONAL. All rights reserved.
Adjustment; Function
ON, when the monitor requires the composite signal for synchronization
OFF, when coloured noise interferes in the B / W picture
0 ... 5 ... 255 = switching delay [s]
0 ... 5 ... 255 = switching threshold from colour to B / W
0 ... 180 ... 255 = switching threshold B / W to colour
ON, when the monitor requires the composite signal for synchronization
OFF, when coloured noise interferes in the B/W picture
Select set of characters (of no significance; only CHR1 is available)
Move insert position (cursor) for the next character
Deletes character at the present insert position
Position the name in the picture with the directional keys and return to the submenu
with the key SET
OFF, ON; for the adjustment ON the picture is mirror-inverted
0 ... 255
0 ... 128 ... 255
0 ... 128 ... 255
0 ... 128 ... 255
0 ... 128 ... 255 = saturation
OFF, ON, ENABLE↵
ON = movements are shown by illuminated blocks
Via ENABLE↵ define the relevant picture areas: press SET, select the grid fields
with the directional keys and activate them for the detection (white) or deactivate
them by shortly pressing the key SET. To return to the submenu keep the key SET
pressed for more than 3 s and then release it.
OFF, ON; for the adjustment ON four coloured frames are inserted which flicker as
soon as a movement is detected in their area
1 ... 4/4; select the frame to be adjusted
0 ... 288 = upper edge of the selected frame
0 ... 288 = lower edge of the selected frame
0 ... 468 = left edge of the selected frame
0 ... 468 = right edge of the selected frame
1 ... 4/4 (... 8/8); select the area to be adjusted
(8 areas are available when MOTION DET ± MONITOR AREA = OFF)
0 ... 288 = upper edge of the selected area
0 ... 288 = lower edge of the selected area
0 ... 468 = left edge of the selected area
0 ... 468 = right edge of the selected area
1 ... 8 = masking colour of the areas
0.00, 0.50, 0.75, 1.00 = transparency of the masking
OFF, ON; for the adjustment ON, the areas are masked with a mosaic effect.
A-1410.99.01.02.2013