SOLIS 7910 Bedienungsanleitung Seite 65

G R I LL IN G S URF A CE WI TH RO U ND INSE T S
■
You can also use the side of the grilling surface with the round insets.
It is especially suited to preparing foods in the round mini­woks or making crêpes
directly on the grilling surface.
SW IT C HI N G T H E A PP L IA N CE O FF
■
If you have additionally switched on the lower heating element, first set the black
switch to "0". The function light next to the switch goes out.
Now, turn the temperature control to the lowest temperature (turn the knob all
the way to the left) and also set the red main switch to "0". The red function light
in the switch goes out, as does the light surrounding of the temperature control.
Pull the plug and let the appliance cool down completely before cleaning it. We
recommend carefully cleaning the grill plate, the accessories and also the appliance
base after every use.
C LE A N I N G A N D C A R E
▲
Check if the power cord has been removed from the appliance and if the grill plate
and die­cast plate have cooled down completely.
If the grill plate and the pans are heavily dirty, you can soak them in lukewarm
water for some time or remove the dirt with a bit of oil and a paper towel. Under
no circumstances use abrasive cleaners or solvents or steel scourers.
Clean the grill plate, the pans, the dough cutter and the plastic spatulas in hot
water with a mild detergent and a soft sponge or towel. After that, rinse and dry
everything carefully. The parts are not dishwasher safe.
The stainless steel plate can be cleaned with a moist towel and then dried.
Clean the appliance base with the die­cast plate for the pans as well as the power
cord – in case should it be dirty – with a slightly moist towel. Never submerge the
appliance base, the power cord and the power plug resp. connection adapter in
water or other liquids and do not spray water or other liquids onto the appliance
parts. Risk of electric shock!
Do not use aggressive cleaners or solvents as well as abrasive materials for any of
the appliance parts. They might damage the surface.
Afterwards, reassemble the appliance.
GB
65