Safety Instructions; Proper Intended Use; Safety Instructions In These Operating Instructions - Habegger Hit-06 Originalbetriebsanleitung

TGT, 26.06.2017
2

Safety instructions

Only use the pulley device if it is in proper working order and in compliance with the operating instructions.
The HABEGGER HIT pulley devices comply with the current state-of-the-art.
Laws, regulations and safety equipment do not offer protection against carelessness and negligence!
Before you work with the pulley device, you must carefully read and comply with the following safety instructions.
It's about your safety!
2.1

Proper intended use

The pulley device is for pulling, lifting, lowering and securing loads and tightening tether and guiding lines. You can find the
permissible tensile force on the type plate and in the technical data.
The pulley devices may only be used to transport persons in compliance with the special requirements.
In the interest of your health, comply with the safety instructions in these operating instructions!
2.2

Safety instructions in these operating instructions

The following symbols and descriptions are used for hazards, warnings and important information:
Warnings include particularly important information you must comply with in order to properly use the described
technology.
Caution! Warning of risks to the device, device parts and the environment.
Danger! Warning of hazards that pose a risk to the health and life of the operator and other persons in the
working area of the pulley device.
©Copyright by Habegger Maschinenfabrik AG
Betriebsanleitung
Technik Seite 35 von 52
Version 03 / 26.06.2017