Introduction; Ec Conformity Declaration - Habegger HIT-06 Originalbetriebsanleitung

TGT, 26.06.2017

Introduction

You have made a good choice with the HABEGGER HIT pulley device. You may already know how your newly-acquired pulley
device works. However, we at HABEGGER recommend that you read these operating instructions carefully before you start
using your device! It contains all of the essential information required to avoid risks and repair costs and increase the service
life of your pulley device.
Always keep these operating instructions at the place where the pulley device is in use and make sure everything who uses it
has read and adheres to these instructions. They must be accessible to all operating personnel in order to avoid handling er-
rors.
In addition to the operating instructions and the accident prevention regulations applicable in the country of use, compliance
with the recognized technical rules for safety and professional conduct is required.
We hope you enjoy and are successful working with a product from HABEGGER.
Original
EC conformity declaration for pulley device HIT 6, HIT 10, HIT 16, HIT 32 including special
designs of this model
We, HABEGGER Maschinenfabrik AG
Mittlere Strasse 66
CH-3600 Thun Switzerland
herewith declare that the device described above complies with the fundamental safety and health-related requirements of the
EC machine directive with respect to its concept and design as well as the design we have introduced to the market. In the
event of unauthorized modifications to the machine, this declaration shall be null and void.
Applicable EC directive:
Applied harmonized standards:
Place: Thun
Date: 26. Juni 2017
CTO
Thomas Gerber
©Copyright by Habegger Maschinenfabrik AG
Betriebsanleitung
Technik
EG-Richtlinie Maschinen 2006/42/EG
EN 13157: 2010-07
EN 1808: 2015-07
EN ISO 12100: 2011-01
CEO
Urs Schneider
Seite 33 von 52
Version 03 / 26.06.2017