User Information; Field Of Application; Used Labels And Symbols; Safekeeping Of Documents And Validity - HellermannTyton M-BOSS Compact Betriebsanleitung

User information

1 User information
Thank you for purchasing a product from
HellermannTyton GmbH. Before the device is used, all
operators who will be using the device must have
carefully read and understood the operating instructions.
This documentation as well as translations hereof are the
property of the HellermannTyton Group. Replication,
editing, reproducing or distribution in whole or in parts
for purposes other than following the original intended
use requires the prior written consent from the
HellermannTyton Group.

1 .1 Field of application

The operating instructions are directed towards the
operator and their personnel. The operating instructions
only apply for the following M-BOSS Compact stainless
steel embossing system, called "device" in the following:
TYPE
M-BOSS Compact
(Embossing system with drawer insert)
M-BOSS Compact modified
(M-BOSS Compact with special characters)
M-BOSS Compact and Organiser
(Embossing system with organiser unit)
M-BOSS Compact and Organiser modified
(M-BOSS Compact and Organiser with special
characters)
The type can be read from the rating plate. The rating
plate with the 7-digit serial number can be found on the
rear of the device.
Example of a rating plate.

1 .2 Used labels and symbols

In these instructions, different labels and symbols are
used in the text. These are explained in the following:
• Symbol for an enumeration
f Symbol for an instruction
1 First step
2 Following steps
; Outcome
Display text/screen text
Æ Cross reference
4
Messages with this symbol contain information about the
environment and how you can help protect it.
Texts with this symbol contain additional information.

1 .3 Safekeeping of documents and validity

f Keep these instructions as well as all other supplied
documents in a safe place, so that they are available at
any time.
f Hand over the complete documentation to the next
owner.
f Please note:
Due to the continuous development of the devices, there
may be deviations between the documentation and the
device. The current edition can be found at
www.HellermannTyton.de/downloads.

1 .4 EC conformity

Article no .
The device fulfills the requirements in accordance with:
544-20000
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
544-20500
• Directive on the restriction of the use of certain
544-21000
hazardous substances in electrical and electronic
equipment 2011/65/EU
544-21500

2 Safety information

The device was manufactured according to the current
state of technology and the recognised safety regula-
tions. Nonetheless, use of the device can result in
hazards to the life and limb of the user or third persons,
or in damage to the device and other material property.
These operating instructions contain information on
safety.
f Always follow all of the instructions to prevent personal
injury, material damage or environmental damage.
2 .1 Representation and layout of warning
instructions
The warning instructions relate to actions and are
structured as follows:
DANGER
Type and source of danger!
Explanations on the type and source of danger.
f Measures to prevent danger.

2 .2 Danger grading of warning instructions

The warning instructions are graded according to the
severity of their danger. In the following, the danger
grading is explained with the corresponding signal
words and warning symbols.
DANGER
Immediate risk of lethal or serious injuries.
Operating instructions • M-BOSS Compact • 06-2020 • v02 • 544-12020