Servicing; Preparation And Follow-Up Tasks; Maintenance And Cleaning; Regular Maintenance Work - HellermannTyton M-BOSS Compact Betriebsanleitung

Servicing

8 Servicing
The following warning instructions apply for all servicing
work.
DANGER
Danger of lethal electric shock!
There is a risk of lethal injury when touching live
components.
f Switch off the device before servicing work.
f Pull the power plug out of the socket.
CAUTION
Risk of injury through improper work!
Safe working on the device requires specialised knowledge.
Improperly performed servicing work can cause injuries.
f Perform servicing work professionally.
f If necessary, have the servicing work performed by an
authorised specialised technician.
NOTE
Material damage caused by improper work!
Safe working on the device requires specialised knowledge.
Improperly performed servicing work can cause damage to
the device.
f Perform servicing work professionally.
f If necessary, have the servicing work performed by an
authorised specialised technician.
Servicing ensures to preserve operational readiness and
to prevent premature wear.
Servicing is divided into:

• Maintenance and cleaning

• Repair

8 .1 Preparation and follow-up tasks

For all servicing work, proceed as follows:
1 Switch off the device using the main switch.
2 Pull the power plug out of the socket.
; The device is without current.
3 Perform the required servicing work.
4 Insert the mains plug into the socket.
5 Switch on the device using the main switch.
; The device is ready for operation.
22
8 .2 Maintenance and cleaning

8 .2 .1 Regular maintenance work

To ensure proper operational status of the device,
defined maintenance work must be performed at the
prescribed intervals.
f With daily use, perform the following regular
maintenance work.
Interval
Check the working area for severe soiling.
Weekly
Check the bolts and cable connections for tightness.
Clean the light sensors and light barriers.
Monthly Clean and lubricate the guide rods.
Clean the working area and drawer.
Clean the exterior housing.
Yearly
Clean the inside of the folding cover.

8 .2 .2 Cleaning agents and materials

The following cleaning agents and materials are required
for maintaining the device:
• Mild cleaning agents
• Lint-free cloth
• Dry brush
• CRC 5-56 Multifunction oil (Article-No. 935-10018)
8 .2 .3 Cleaning the marker light sensor and light
barriers
Proceed as follows:
1 Open the folding cover.
2 Swivel the bridge upwards.
3 Clean the marker light sensor and X-Home light barrier
with a dry brush or compressed air.
2
1
1 Marker light sensor
2 X-Home light barrier
Operating instructions • M-BOSS Compact • 06-2020 • v02 • 544-12020
Maintenance work