Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Power Input Fuse; Decommissioning; Decommissioning The Device; Putting The Device Back Into Operation - HellermannTyton M-BOSS Compact Betriebsanleitung

Edelstahlprägesystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8 .3 .3 Replacing the power input fuse

Proceed as follows:
1 Pull out defective power input fuses with a flat-bladed
screwdriver.
2
1
Replacing the power input fuse.
1 Flat screwdriver
2 Power input fuse
2 Insert the corresponding replacement fuse (3G, 3A
slow-blow, 250 Volt, 6.3x32).
; The device can be switched on again.
Operating instructions • M-BOSS Compact • 06-2020 • v02 • 544-12020

9 Decommissioning

DANGER
Danger of lethal electric shock!
There is a risk of lethal injury when touching live
components.
f Switch off the device before servicing work.
f Pull the power plug out of the socket.

9 .1 Decommissioning the device

Proceed as follows:
1 Switch off the device using the main switch.
2 Pull the power plug of the device out of the socket.
3 Shut down the PC or notebook.
4 Disconnect the USB cable from the PC or notebook.
5 Disconnect the USB cable from the device.
6 Disconnect the power cable from the device.
; The device is stopped.

9 .2 Putting the device back into operation

Proceed as follows:
1 Start the PC or notebook.
2 Connect the power cable to the device.
3 Connect the USB cable to the device.
4 Connect the USB cable of the device to the PC or
notebook.
5 Connect the power cable of the device to a power
socket.
6 Switch on the device using the main switch.
; The device is ready for operation.

10 Disposal

After termination of use, the purchaser or the operator
must properly dispose of the device including the
accessories.
The purchaser or the operator releases HellermannTyton
GmbH from the obligations according to Section 10 (2)
of the German Electrical and Electronic Equipment Act
(Return obligation of the manufacturer) and from any
associated third-party claims.
This device was manufactured according to the current
environmental protection standards. The materials can be
separated and recycled.
f Observe the national regulations for the disposal of
recyclable fractions, electronic parts and batteries.
f Do not dispose of the device as domestic waste.
f Bring the device to a local collection point or recycling
centre.
f If necessary, contact your local environmental office.
Decommissioning
25

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis