Installing The Tagprint Pro Software; Operation; Switch On The Device; Filling And Inserting The Magazine - HellermannTyton M-BOSS Compact Betriebsanleitung

9 Select the arrow. Right-click on the icon and close the
Metal Printer Monitor.
; The Metal Printer Monitor is installed.

5 .4 Installing the TagPrint Pro software

The screen displays shown serve for orientation. The
designation of the buttons and menus is explained in the
instruction texts.
Proceed as follows:
1 Call up the download link:
https://www.hellermanntyton.de/downloads/software.
2 Install TagPrint Pro.
; TagPrint Pro has been installed and can be used.
Operating instructions • M-BOSS Compact • 06-2020 • v02 • 544-12020

6 Operation

The markers are designed with the TagPrint Pro software
and embossed with the M-BOSS Compact.
The following 42 characters can be used for labelling:
Letters A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Numbers
Symbols
Special charac-
ters (Device article no. 544-20500 and 544-21500)
The letter O and the number 0 have the same character for
labelling.
Operation is carried out in the prescribed sequence:

1. Switch on the device.

2. Fill and insert the magazine.
3. Connect the device.
4. Perform single or serial embossing.
5. Remove the marker.
Æ Section 6.1-6.5
6 .1 Switch on the device
Proceed as follows:
1 Switch on the device with the main switch.
2 Start the Metal Printer Monitor.
3 Select the "Restore" function field.
; The device moves to its basic position and the status
message READY appears on the Metal Printer Monitor.

6 .2 Filling and inserting the magazine

NOTE
Possible malfunction!
The device operation is stopped and the embossing is
interrupted when the folding cover is opened.
f Only open the folding cover when the device is at a
standstill.
NOTE
Material damage caused by false markers!
The device can be damaged by using the wrong markers.
f Only use stainless steels markers from HellermannTyton.
The magazine must be filled with markers and inserted.
Proceed as follows:
1 Open the folding cover.
Operation
0 1 2 3 4 5 6 7 8 9
& - / . , '
Available upon request
15