Performing Serial Embossing - HellermannTyton M-BOSS Compact Betriebsanleitung

Operation
; The embossing process starts.

6 .4 Performing serial embossing

The screen displays shown serve for orientation. The
designation of the buttons and menus is explained in the
instruction texts.
The markers are designed using the TagPrint Pro soft-
ware.
Proceed as follows:
1 Start the TagPrint Pro software on the PC or notebook.
2 Open a new file in M-BOSS Designer.
3 Right-click on the {constant} input area and select
Table.
18
4 Create a new table.
5 Enter the embossing text in Column A and the number
of copies in Column B.
6 Mark Column B and activate Copies in the menu bar.
Column B remains marked.
Operating instructions • M-BOSS Compact • 06-2020 • v02 • 544-12020