B) Mounting - Sygonix SY-VS-400 Bedienungsanleitung

b) Mounting

Check the provided screw is appropriate for the surface
material. If in doubt consult a professional.
• If needed, insert the plastic dowel using a mallet.
• Mark the spot where to drill the hole for the mounting screw.
• Insert the screw leaving enough of the head protruding so that
the wall mount slot (11) can latch on.
If the bracket is loose you may need to tighten the
screw.
Attach the device to the magnetic ball joint (10) and make
•
sure it is firmly held in place before letting go.
41