Herunterladen Inhalt Inhalt Diese Seite drucken

Beem Multi-MiXX Bedienungsanleitung Seite 24

Küchenmaschine & handmixer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Multi-MiXX
If necessary, press the tare button (21)
to set the scales to "0".
Add the ingredients to the mixing bowl
until the desired weight has been
reached
NOTE
Reset the scales to "0" after adding
each ingredient by pressing the tare
button (21) in order to weigh in ad-
ditional ingredients.
Do not exceed the permitted overall
weight of approx. 3 kg when filling
the mixing bowl with ingredients.
Press the ON/OFF button (20) to
switch off the scales or wait until
they switch off automatically after
approx. one minute.
The scales only work correctly when
the hand mixer socket (16) is folded
up.
Stirring with the mixer stand
(images D1, D2)
To use the mixer stand with the hand
mixer, lock the hand mixer into the socket
of the mixer stand (16).
Proceed as follows:
Insert the required stirring tools into
the hand as describe in the section
Inserting the stirring tools/scraper
page 20.
Lock the hand-held appliance in the
socket of the mixer stand (16) so that
it snaps in.
Insert the scraper (13) into its
socket (10) on the mixer stand as
described in the section Inserting the
stirring tools/scraper page 20.
Fill the mixing bowl (23) with the in-
gredients as described in the section
Operating the scales (page 21).
Push the lid of the mixing bowl (24)
into the socket (26; image D1) on the
mixer stand.
22
Press the release button (18) of the
mixer stand to lower the hand mixer
into the mixing bowl (image D2).
Switch on the hand mixer.
After filling the ingredients, open the
feeder opening in the lid (25) to refill
with further ingredients.
After stirring, press the release but-
ton (18) and tip the hand mixer up-
wards. Remove the mixing bowl to
continue processing the contents.
NOTE
The mixing bowl revolves automati-
cally during stirring. The scraper (13)
removes the ingredients from the
edges to achieve optimum mixing.
Disassembling the mixer stand
After using the mixer stand, disassemble
and clean it as follows:
Press the release button (17; image
C1) to remove the hand mixer.
Remove the stirring tools from the
appliance as described in the section
Removing the stirring tools/scraper
(page 21).
Remove the scraper as described in
the section Removing the stirring
tools/scraper (page 21).
Clean the accessories as described
in the section Cleaning and care
(page 25).
BEEM - Elements of Lifestyle
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis