Electrical Connection; Appliance Description - Beem Multi-MiXX Bedienungsanleitung

EN

Electrical connection

For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
■ Before connecting the appliance,
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. The
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
■ The mains socket must be protected
by at least a 10 A automatic circuit
breaker.
■ Ensure that the mains cable is undam-
aged and is not laid over hot surfaces
or sharp edges.
■ The connecting cable must not be
strained or bent.
■ Always unwind the mains cable com-
pletely before connecting the appliance
to the mains socket.
■ Do not allow the connecting cable to
hang over edges (trip wire effect).
■ The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle

Appliance description

(see illustration on the left fold-out)
1 Hand mixer
2 Mains connecting cable
3 Pedestal
4 Handle
5 Ejector button
6 Turbo button
7 Speed controller
8 Lighting
9 Stirring tool socket
10 Scraper socket
11 Stirring hook
12 Kneading hook
13 Scraper
14 Hand spatula
15 Mixer stand
16 Hand mixer socket
17 Hand mixer release
18 "Tip" release
19 Scales display
20 Scales ON/OFF switch
21 Tare button
22 Base with integrated scales
23 Mixing bowl with drive gear teeth
24 Lid, mixing bowl
25 Feeder opening
26 Lid recess
27 User manual (not illustrated)
Multi-MiXX
19