Using The Mixer Stand - Beem Multi-MiXX Bedienungsanleitung

EN
Removing the stirring tools/scraper
(image B1)
ATTENTION
► Press the ejector button (5) only
when the appliance has stopped
completely.
Press the ejector button (5) down-
‹
wards to remove the stirring tools (im-
age B1).
To remove the scraper, simply pull it
‹
out of its socket (10).
Using the hand mixer
(image C1-C3)
Use a tall receptacle made of plastic or
stainless steel for stirring or kneading.
If necessary, remove the hand mixer.
‹
Press the release (17) and pull it up
to remove it from the appliance (im-
age C1).
If required, (see
‹
insert the stirring hook (11) or the
kneading hook (12) into the appliance
as described in the section Inserting
the stirring tools/scraper (page 20).
Insert the plug into the mains socket.
‹
Immerse the stirring tools into the in-
‹
gredients.
Switch on the hand mixer with the
‹
speed controller (7) and set the de-
sired speed.
A blue indicator light switches on dur-
‹
ing operation to provide optimum vis-
ibility for the dough (image C2).
BEEM - Elements of Lifestyle
instructions for use)
NOTE
► The tougher the mass to be stirred,
the slower the speed to be set (see
Speed table page 23).
► If you decide to take a break, place
the appliance upright on its pedes-
tal (3) so that drips can drip from the
stirring tools into the stirring recepta-
cle (image C3).
Switch off the hand mixer before re-
‹
moving it from the stirred mixture in
order to avoid soiling.
Remove the stirring tools from
‹
the appliance as described in the
section Removing the stirring
tools (page21).
Clean the appliance as described in the
‹
section Cleaning and care (page 25).

Using the mixer stand

The hand mixer can be used on a mixer
stand. Together with the integrated scales,
this provides you with a convenient food
processor.
Operating the scales
The mixer stand is equipped with an in-
tegrated scales for exact weighing of the
ingredients. To use the scales, proceed as
follows:
Put the mixing bowl onto the base of
‹
the mixer stand (22).
Press the ON/OFF switch (20) to
‹
switch on the scales.
Multi-MiXX
21