Before Using The Appliance The First Time; Operation - Unold 18805 Bedienungsanleitung

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials
and any transport safety devices.
Keep packaging materials away
from children - danger of suffo-
cation!
2. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3. Check to make sure that the
appliance is stable.
4. Connect the base via the power
cord to the power supply (220–
240 V~, 50/60 Hz).
5. Remove the kettle from the base.
6. Open the lid by gripping into the
lid and pulling it upwards.

OPERATION

1. Remove the kettle from the base.
2. Open the lid by gripping into the
lid and pulling it upwards.
3. Fill the kettle with at least
0.5 liters of water. Do not fill the
kettle with more than 1.7 liters of
water ("Max" marking).
4. Close the lid by pressing lightly
until it locks into place. The
locking mechanism prevents the
lid from opening accidentally
when pouring water.
5. Place the kettle level on the base.
The upright power connection
must fit exactly into the opening
at the underside of the kettle.
6. Switch on the kettle by pressing
the key to I. The control lamp on
top of the handle will turn on.
Copyright UNOLD AG | www.unold.de
7. Add clear, cold water to the "Max"
marking.
8. Close the lid by pressing lightly.
9. Place the kettle level on the base.
The upright power connection
must fit exactly into the opening
at the underside of the kettle.
10. Switch on the kettle by pressing
the key to I. The control lamp on
top of the handle will turn on.
11. When the water boils, the appli-
ance automatically shuts off.
12. For hygienic reasons, please dis-
card the water from the first boi-
ling.
7. When the water boils, the appli-
ance automatically shuts off.
8. To make the water stop boiling
earlier, press the switch upward.
9. Caution: The automatic shut-off
function works only if the lid is
properly closed.
10. If the kettle is lifted up before the
water boils, it has to be switched
off by pressing the I/O switch. If
the appliance is not switched off
and then placed back on the base,
the boiling will be continued.
11. If you want to boil more water,
please allow the appliance to cool
off for a few minutes.
12. The appliance features boil dry
protection. When operated wit-
hout water or with excessive sca-
17