Delivery Contents; Parts Description; Technical Data; Safety - LIVARNO LUX IAN 333239_1910 Montage-, Bedienungs- Und Sicherheitshinweise

Delivery contents

1 LED wall light; Model 14144905L / 14144906L /
14145005L / 14145006L
2 Wall plugs
2 Screws (light housing)
1 Set of assembly instructions and instructions
for use

Parts description

Light housing
1
Wall plug
2
Mains connection cable (external)
3
Connection box cover
4
Connection box
5
Screws (connection box)
6
Light housing cover
7
Lustre terminal
8
Screws (light housing)
9
Motion detector (14144905L / 14144906L)
10

Technical data

Model No.: 14144905L / 14144906L /
14145005L / 14145006L
Operating voltage: 230–240 V ~ , 50 Hz
Rated power: max. 11 W (non-replaceable)
Motion detector
range: approx. 8 m (14144905L /
14144906L)
Safety class: II /
IP rating: IP44
LED:
Rated power: LED, 10.5 W LED module
(non-replaceable)

Safety

Safety notices

Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
DANGER TO LIFE AND ACCI-
DENT HAZARD FOR TODDLERS
AND SMALL CHILDREN!
Never leave children unattended with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers. Please
keep children away from the product at all times.
Danger to life from
electric shock!
Ensure that a qualified electrician, or a person
trained to carry out electrical installations, per-
forms the electrical installation.
We assume no liability for material damage or
personal injury due to improper handling or
failure to comply with the safety instructions!
Never use the light if any defects have been
identified.
Prior to installation, remove the fuse or switch
off the circuit breaker (0 setting) in the fuse
box. Set the light switch to the "OFF" position.
Prior to installation, verify that the mains voltage
on site corresponds with the operating voltage
required for the light (see "Technical data").
Before drilling, ensure that there are no gas or
water pipes or cables where you intend to drill.
Installation may only be carried out by experts.
It is essential that you take note of the wall
quality, as the included fittings are not suitable
for all types of wall.
It is essential that you take note of the wall
quality, as the included fittings are not suitable
for all types of wall.
Introduction / Safety
GB/IE 13