Wallbox Eiffel Installationsanleitung Seite 18

3 - Mounting
A.
Open the back plate of the
pedestal and draw the power
supply cable. Then fix the
pedestal to the foundation.
Tighten the iNDEX screws up
to 60Nm
B.
Install the charger according its
installation manual.
For Dual installation,
place one charger at the back
panel after replacing the long
plate (Accessory).
C.
Fix the plug holder on the front
panel by inserting the screws on
the welded nuts.
All the installation manuals are available on: https://support.wallbox.com
18