Klarstein 10034946 Bedienungsanleitung Seite 51

Problem Possible causes
Fan noise A cooling fan built into your
coming from the induction hob has come on to
induction hob. prevent the electronics from
overheating. It may continue to
run even after you've turned the
induction hob off.
Pans do not The induction hob cannot
become hot and detect the pan because it is not
are not shown suitable for induction cooking.
on the display..
The induction hob cannot detect
the pan because it is too small
for the cooking zone or not
properly centred on it.
The induction Technical fault.
hob or a
cooking zone
has turned
itself off
unexpectedly, a
tone sounds and
an error code
is displayed
(typically
alternating with
one or two
digits in the
cooking timer
display)..
Note: If an error occurs, the induction hob automatically switches to protection
mode and the buzzer sounds. Please contact customer service for assistance. Do not
disassemble the appliance yourself to avoid hazards and damage to the induction
hob.
What to do
This is normal and requires
no action. Do not disconnect
the power to the induction
hob while the unit's fan is still
running.
Use cookware suitable
for induction cooking (see
"Choosing the right cookware"
section.).
Centre the pan and make sure
that its base matches the size of
the cooking zone.
Please note down the error
letters and numbers, disconnect
the power to the induction
hob and contact a qualified
technician.
EN
51