Standard Configuration; Bridge Mode - LD Systems Premium Vue-Line SP1K8 Bedienungsanleitung

CONFIgURATION:
The amplifier has an ensemble of minidips on the back panel, which allow for the following configurations: the
highpass subsonic filter, the ICL deactivation and the bridge mode. All these configurations can be cross-set in any
way, independently from the others. The basic configuration possibilities are as follows:
12

STANDARD CONfIGURATION

the amplifier works without high pass subsonic filter,
Clip Limiter ICL enabled and no Bridge mode.
SUB-SONIC fILTER ENABLED
the amplifier works with high pass subsonic filter (30Hz in this case), Clip Limiter ICL
enabled and no Bridge mode.

BRIDGE MODE

the amplifier works without high pass subsonic filter, Clip Limiter ICL enabled and
Bridge mode.
ICL CLIP LIMITER DISABLED
the amplifier works without high pass subsonic filter,
Clip Limiter ICL disabled and no Bridge mode.