Vox (Voice Operated Transmission) - Radioddity FS-T2 Benutzerhandbuch

VOX (Voice Operated Transmission)

VOX is convenient to start a conversation without pressing the PTT button. The transceiver automatically
s
when you are speaking to the microphone.
1. When operating the VOX function, be sure to set the VOX gain level which allows the transceiver
to recognize the sound.
2. If the microphone is too sensitive, the transceiver will begin transmitting when there is noise in the
background.
If it is not sensitive enough, it will not pick up your voice when you are speaking. Be sure to adjust the
VOX gain level to an appropriate sensitivity to allow smooth transmission.
will display on the LCD screen.
Press [UP] or [DOWN] to select OFF/1/2/3
the standby mode, you can also wait for 8 seconds and it will be saved automatically.
Tip: Select appropriate parameters according to the noise situation of the use environment:
3= high sensitivity, suitable for low background noise.
2= medium sensitivity, suitable for most situations.
1= low sensitivity, suitable for loud background noise.
09
Key Tone
It allows you to set the button tone on or off.
will display
Press UP or DOWN to select ON or OFF.
the standby mode,you can also wait for 8 seconds and it will be saved automatically.
Roger Tone
When roger tone is turned on, the transmission is over, the radio will make a unique sound, indicate
that the conversation is completed.
will display
Press [UP] or [DOWN] to select ON or OFF.
back to the standby mode,you can also wait for 8 seconds and it will be saved automatically.
,the ON/OFF will flash.
, and the ON/OFF will flash.
10