Replacing The Battery - Sanitas SFT 65 Gebrauchsanweisung

The temperature last measured, i.e. only the last value of a series of measurements, is automatically stored as soon as
the thermometer switches itself off or is switched off . There are 10 memory spaces available for this.
To switch the thermometer off , press the
If you do not press any other buttons, the thermometer automatically switches off approx. one minute after displaying
the measured value.
To call up the saved values, switch the thermometer on and press the
The date, time, storage space number, the measurement mode symbol and the temperature are displayed in turn.
Browse through the stored measurements by pressing the
8

Replacing the battery

When the batteries get weak, the battery warning symbol appears
batteries must be replaced. When the battery symbol fl ashes
replaced. If the batteries are too fl at, then the thermometer will switch off automatically.
Note:
• When changing the batteries, use batteries of the same type, make and capacity.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.
and buttons simultaneously for approx. 3 seconds.
button repeatedly.
and
button.
. It is still possible to measure temperature. The
appears in the display, the batteries must be
27