When Connecting The External Unit Featuring Video Source; When Connecting The Rear Display; When Using A Rear Display Connected To Rear Video Output - Pioneer AVIC-X3 Installationsanleitung

Section
03 Connecting the System
CAUTION
Be sure to use a CD-RM10 (sold separately) for
wiring. If you use other cables, there is a case
where wiring position differs, images and sounds
may be disturbed.
OK
L
V G R
When connecting the
external unit featuring video
source
The hide-away unit
Yellow
(VIDEO IN)
RCA cable
(sold separately)
To video output
! It is necessary to set "AV1 Input" in
"System" to "EXT" when connecting the ex-
ternal video component. (For details, refer
to the Operation Manual.)
18
Engb
L : Left audio (White)
R : Right audio (Red)
L
V : Video (Yellow)
R G V
G : Earth
Blue
IP-BUS cable
(sold separately)
To IP-BUS
output
Pioneer external unit
(sold separately)
When connecting the rear
display
The hide-away unit
Yellow
(VIDEO OUT)
To video input
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
Black
source while driving.
This navigation system's rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
White, Red
(AUDIO OUT)
RCA cables
(sold separately)
To audio inputs
Rear display with
RCA input jacks