Pioneer AVIC-X3 Installationsanleitung Seite 11

Connecting the System
The display unit
Power cord
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the Operation Manual.
— voice guidance of the navigation
— incoming ringtone and incoming voice of the mobile phone that is
The aerial will automatically retract or turn off, yet the timing varies
depending on the setting. For more detailed information on changing
the "Antenna Control" mode, refer to the Operation Manual.
Blue (*6)
The pin position of the ISO connector will
differ depending on the type of vehicle.
Connect *6 and *7 when Pin 5 is an aerial
control type. In other types of vehicle,
never connect *6 and *7.
Note
Cords for this navigation system and those for other products may
be different colours even if they have the same function. When
connecting this navigation system to another product, refer to the
supplied manuals of both products and connect cords that have
the same function.
Yellow/Black (MUTE)
If you use an equipment with mute function, connect that
equipment to the Audio Mute lead. If not, keep the Audio
Mute lead free of any connections.
Note
connected to this navigation system via Bluetooth wireless technology
Note
Blue Blue (*7)
To Auto-aerial relay control terminal.
If the vehicle has a glass aerial,
connect to the aerial booster power
control terminal (max. 300 mA
12 V DC).
Section
03
11
Engb