When Connecting The Rear Display; When Using A Rear Display Connected To Rear Video Output; When Connecting The External Video Component; Using "Av1 Input" (Av1) - Pioneer AVIC-F700BT Installationsanleitung

Connecting the System
When connecting the rear
display
This connection is unnecessary for AVIC-
F700BT.
The navigation unit
RCA connector
15 cm
RCA cables
(sold separately)
To video input
Rear display with
RCA input jacks
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system's rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
Yellow
(REAR MONITOR
OUTPUT)
When connecting the
external video component

Using "AV1 Input" (AV1)

The navigation unit
RCA connector
Yellow
(VIDEO INPUT)
To video output
External video
component
(sold separately)
! It is necessary to set [AV1 Input] in [AV
Settings] to [Video] when connecting the
external video component. (For details,
refer to "Operation Manual".)
20 cm
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
To audio outputs
Engb
Section
03
17