Activate Emergency Stop / Switch Off The Machine; Fine Adjustment Of Parameters For Desired Edge Result; Glue Quantiy Adjustment; Basic Setting Adjusting The Workpiece Feed - HOLZMANN-MASCHINEN KAM215EPSV Betriebsanleitung

16.2.5

Activate emergency stop / switch off the machine.

16.3 Fine adjustment of parameters for desired edge result

In order to achieve the desired edge band result, fine adjustments are necessary on the machine,
depending on the edge thickness and the desired shape.
16.3.1

Glue quantiy adjustment

16.3.2

Basic setting Adjusting the workpiece feed

HOLZMANN MASCHINEN GmbH
Only in emergency situations:
Stop the machine using one of the two EMERGENCY
STOP buttons (5)
Switch off the machine:
First deactivate/stop all units, then turn the switch
(2) on the control panel to position (O) "OFF" and
turn the main switch (1) to position (0).
www.holzmann-maschinen.at
The amount of glue can be adjusted with
the hand crank (2). To do this, loosen the
lock nut (1), turn the crank handle (2) to
set the desired amount of glue. Then fix the
lock nut (1) again.
With the hand wheel (1) the distance to the
conveyor belt can be adjusted
OPERATION
47
KAM215EPSV