WIKA A2G-52 Betriebsanleitung Seite 13

5. Commissioning, operation
CAUTION!
Damage to the instrument
When working on open electric circuits (printed circuit boards)
there is a risk of damaging sensitive electronic components
through electrostatic discharge.
▶
The correct use of grounded working surfaces and
personal armbands is required.
DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
▶
The instrument may only be installed and mounted by
skilled personnel.
▶
Operation using a defective power supply unit (e.g. short
circuit from the mains voltage to the output voltage) can
result in life-threatening voltages at the instrument!
1. Instrument fixing at the desired mounting location
(see chapter 5.1 "Instrument mounting")
2. Opening the instrument cover, feeding the connection cable through
the cable gland and connecting the wires to the terminal block (see
chapter 5.3 "Electrical mounting")
3. The instrument is now ready for configuration (see chapter 5.4
"Configuration")
WIKA operating instructions model A2G-52
EN
13