Using The Self-Propel Drive; Shutting Off The Engine; Engaging The Blade - Toro Recycler 20958 Bedienungsanleitung

Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (Figure 15).
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.

Shutting Off the Engine

Service Interval: Before each use or daily
To shut off the engine, press and hold the
engine-shutoff button (Figure
off.
Figure 15
8) until the engine shuts
Figure 16

Engaging the Blade

When you start your engine, the blade does not turn.
You must engage the blade to mow.
1. Pull the control-bar lock back
g233423
2. Pull the blade-control bar to the handle
18).
3. Hold the blade-control bar against the handle
(Figure 19).
g236566
12
(Figure 17).
Figure 17
Figure 18
Figure 19
g003123
(Figure
g003124
g003125