Toro Recycler 20958 Bedienungsanleitung Seite 18

Figure 27
1. Operating position
3. Insert the carriage bolt (with the bolt head toward
the inside) through the handle bracket and the
upper hole in the handle end. Ensure that the
square edges of each carriage bolt fits into the
upper or lower square hole in its related handle
bracket (Figure 28).
Figure 28
1. Handle knob
4. Loosely install the handle knobs and carriage
bolts on the handle brackets.
5. To unfold the handle, refer to
Unfolding the Handle (page
g036582
2. Folded position
g032865
2. Carriage bolt
1 Assembling and
5).
17