Renkforce RF2000 v2 Bedienungsanleitung Seite 24

Print File
Back
Files
Position
Home all
Home X
Home Y
Home Z
Position X
Position Y
Position Z
Position Extruder
Extruder
Temp. Bed: 0°C
Temp. 0
Temp. 1
Extruder 0 off
Extruder 1 off
Active Extruder: 0/1
Position Extruder
Load Filament
Unload Filament
Set E Origin
Fan Speed
Fan Speed: 0%
Turn Fan off
Fan to 25%
Fan to 50%
Fan to 75%
Fan to 100%
SD Card Print File
Delete File
24
X: 0.00 mm
Endstop min: Off/On
Endstop max: N/A
Single Move/1 mm/10 mm/50 mm/Single Steps
Y: 0.00 mm
Endstop min: On/Off
Endstop max: N/A
Single Move/1 mm/10 mm/50 mm/Single Steps
Z: 0.00 mm
Endstop min: On/Off
Endstop max: Off/On
Single Move/1 mm/10 mm/50 mm/Single Steps
E: 0.00 mm
1 click = 1 mm
: 0°C
: 0°C
E: 0.00 mm
1 click = 1 mm
Back
Files
Back
Files