Position Indicator; Basic Settings - D+H BDT-Advanced Originalbetriebsanleitung

Position indicator

The position indication at the pushbutton of the drive symbolizes the position of the fitting.
The position of the marking is comparable with the position of a normal window handle.
Closed an
locked

Basic Settings

The configuration mode for
setting the basic functions can
be started by pressing (> 5 Sec.)
the programming button. Press
the relevant button to change
the setting.
Exit the configuration mode by
pressing the programming
button again.
5
>
Sec.
99.828.08 1.0/12/19
Turning position
hinge on the right
Turning key lights
Window
=
hinge on the right
(drive left-hand mounted)
Turning key does not light
Window
=
hinge on the left
(drive right-hand mounted)
Info key lights
(factory setting)
=
Key illumination
switched on
Info key does not light
=
Key illumination
switched off
English
Turning position
hinge on the left
(factory setting)
The condition of the drive is
permanently displayed by
lighting of the corresponding
buttons.
The key Illumination turns off
automatically after 20 seconds.
Tilting position
Unlocking direction
27/36
BDT-Advanced