Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press "
" button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
• Press "P/CH +" button to select the next programme or
"P/CH -" button to select the previous programme.
Viewing Main Menu
• Press "
" and "
time to view main menu. In the main menu select
sub-menu using "P/CH -" or "P/CH +" buttons and
enter the sub-menu using "
buttons. To learn the usage of the menus, refer to
the menu system sections.
AV Mode
• Press the "TV/AV" button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press "V -" button to increase the volume. Press "V
+" button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press "P -" button to select the previous
programme.
• Press "P +" button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10 - 1000 (for IDTV) or 10-199 (for
analogue), press the numeric buttons consecutively.
Press directly the programme number to reselect
single digit programmes.
When the TV is turned on for the rst time, the menu
for the language selection appears on the screen. The
message "Welcome please select your language!"
is displayed in all language options sequentially in
the OSD.
By pressing the " " or " " buttons highlight the language
you want to set and press OK button.
You can get information about the menu usage by
pressing "INFO" button. Press "INFO" button again
to exit the help menu.
After then, "First time installation" OSD will appear
on the screen. By pressing " " or " " buttons, select
the country you want to set and press OK button.
" buttons at the same
" or "
"
Note: Country selection will not be available for UK.
Press OK to continue.
After then, the active antenna selection OSD appears
on the screen:
By pressing " " or " " buttons, set active antenna
mode as on or off.
If an active antenna is connected to your TV, you can
select this option as On. Antenna power should be
"Off" when standard antenna is used instead of the
active antenna. See "Con guration Menu" in the
following sections for more information.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the "Yes" or "No" option, highlight the item
After then, the following OSD will be displayed on
the screen:
English - 58 -
Initial Settings
by using " " or " " buttons and press OK button.
Werbung
Kapitel
