Sound Menu - Schaub Lorenz 32LT655C Bedienungsanleitung

Reset
Press " " or " " button to select Reset. Press
" " or " " or OK button to reset the picture modes to
factory default settings.
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. "Stored..." will be
displayed on the screen.

Sound Menu

Volume
Press " " or " " button to select Volume. Press " "
or " " button to change the level of the Volume.
Equalizer
Press " " or " " button to select Equalizer. Press "
" button to view equalizer menu.
Press " " or " " button to change the preset. In
equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User.
Select the desired frequency by pressing " " or " "
button and increase or decrease the frequency gain
by pressing " " or " " button.
Press the "MENU" button to return to the previous
menu.
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User.
Balance
This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance. Press "
" or " " button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
Headphone
Press " " or " " button to select Headphone. Press
" " button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press " " or " " button to select Volume. Press "
" button to increase headphone volume level. Press
" " button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63.
Headphone Sound (optional)
Press " " or " " button to select Headphone Sound.
Using " " or " " button, you can select Main, PIP/PAP,
Active or Inactive.
Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive window.
Sound Mode (optional)
Press " " or " " button to select Sound Mode. Using
" " or " " button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain  xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press " " or " " button to select AVL. Press " " or
" " button to set the AVL as On or Off.
SRS TruSurr XT (optional)
By pressing " " or " " select SRS TruSurr XT.
Press " " or " " button to set SRS TruSurr XT as
on or off.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
English - 71 -