Replacing the Fuse
For Electric-Start Models
If the battery does not charge or the engine does not
run with the electric starter, the fuse may be blown.
Replace it with a 40 A plug-in type fuse.
1.
Raise the rear deflector and locate the battery
compartment
(Figure
Figure 30
1. Rear deflector
2. Screw
2.
Wipe away any debris from the battery
compartment area.
3.
Remove the screw that secures the battery
compartment, pull out the battery, and locate the
fuse
(Figure
31).
Figure 31
1. Cover
2. Fuse holder
30).
3. Battery
4. Battery compartment
3. Fuse
4.
Replace the fuse in the fuse holder
Note:
Your machine comes with a spare fuse in
the battery compartment.
5.
Install the battery compartment with the screw
that you removed in step 3.
6.
Install the cover over the battery compartment.
7.
Lower the rear deflector.
g009506
g017398
23
(Figure
31).