Optionen; Option 'Shadecover - Fronius Symo Advanced 10.0-3 208-240 Installationsanleitung

Optionen

Optionen
OPTION ‚Shade-
Cover'
HINWEIS!
A DIN rail is provided in order to mount
accessory electrical devices including,
but not limited to, overcurrent protec-
tion, metering, radio or cellular modem.
Maximum size for mounting of all devices
is 4w x 4,75l x 2,59 inches. The installer
takes responsibility for any undesired
effect on the inverter by installing an
electrical device in this area, caution
should be taken when installing a device
that may output significant amounts of
heat or radio interference. Always insure
that the device does not inhibit the inverter
from closing and sealing properly. Any
questions about device eligibility should be
directed toward technical support.
- Use the ShadeCover when the inver-
ter is exposed to direct sunlight
- Use 4 screws for proper mounting
NO MOUNTING
63