Abicor Binzel MF1/2 Betriebsanleitung Seite 29

MF1/2
6.1.2 Drive rollers
NOTE
• Red drive rollers = V groove / blue drive rollers = U groove
1 Unscrew the knurled screws (4) and take them out.
2 Place drive rollers (5) on guide pins and secure them with knurled
screws (4).
3 Swivel pressure rocker (9) into position, insert the eccentric bolt (3) and turn
it over.
4 Put on protection cap (1).
6 Putting into operation
EN - 11